Re: HP23 printing problems after testing ok (Inkjet Refilling Talk)

Re: HP23 printing problems after testing ok
Author: Mark	February 18, 2005 at 14:05:31
in reply to: Re: HP23 printing problems after testing ok* posted by Alchemist on February 17, 2005 at 20:35:29*

Thanks for responding. Refilling process was as follows:
Steamed cartridge heads Left overnight on tissues to absorb
old ink Manually injected ink through vent holes, injecting
ink slowly with needle about a few centimeters from bottom
of cartride, in an upright position. Primed cartridge using
a clip and syringe left overnight after clipping tested ok.
Clipped again for delivery

Have not received failed carts back yet for testing but
believe that not all three colours working.

Mark

> Mark,
>
> Can you provide some more details about the refilling process and what do you mean by not printing correctly? When you do I will walk you through the process to fix the problem
>
> Alchemist
>
> > Hope someone can help. I have recently commenced refilling
> > cartridges. I have sold some HP23 Colour carts. They tested
> > fine after refill and I delivered them with clips however
> > when the customer went to use them they did not print
> > correctly. Can anyone explain what the cause of this may be
> >
> > Many thanks

Follow Ups

Re: HP23 printing problems after testing ok Alchemist 23:34:42 2/18/2005 (0)

Post Followup

Name:
E-Mail:
Subject:
> Thanks for responding. Refilling process was as follows: > Steamed cartridge heads Left overnight on tissues to absorb > old ink Manually injected ink through vent holes, injecting > ink slowly with needle about a few centimeters from bottom > of cartride, in an upright position. Primed cartridge using > a clip and syringe left overnight after clipping tested ok. > Clipped again for delivery > > Have not received failed carts back yet for testing but > believe that not all three colours working. > > Mark > > > Mark, > > > > Can you provide some more details about the refilling process and what do you mean by not printing correctly? When you do I will walk you through the process to fix the problem > > > > Alchemist > > > > > Hope someone can help. I have recently commenced refilling > > > cartridges. I have sold some HP23 Colour carts. They tested > > > fine after refill and I delivered them with clips however > > > when the customer went to use them they did not print > > > correctly. Can anyone explain what the cause of this may be > > > > > > Many thanks
Optional link URL:
Link title:
Optional image URL: