Re: bc-02 blocked solid (Inkjet Refilling Talk)

Re: bc-02 blocked solid
Author: Alchemist	June 30, 2005 at 22:14:16
in reply to: bc-02 blocked solid* posted by species on June 30, 2005 at 06:26:13*

Species,

Try removing the side cover and the the printhead. It can be flushed out by attaching a syringe to the inlet from the foam container. Then reseal and glue back the printhead/pcb contact assembly. Next reglue the cover plate. This works as a last resort and is less damaging then extended immersion in an ultrasonic bath.

Alchemist

> I have tried dipping the head in boiling water, and dipping
> the head in alcohol and even bleach. But it is still
> blocked solid. Yes, I tried forcing air through the vent as
> well.
>
> The only thing I can think of is to immerse the whole cart
> in boiling water and biol it for a few minutes to try and
> dissolve the blockage - whereever it is
>
> Any thoughts

Follow Ups

Re: bc-02 blocked solid Area 16:35:21 8/15/2005 (0)
Re: bc-02 leakage from printhead to tank species8350 01:52:17 7/22/2005 (0)
Re: bc-02 blocked solid species8350 05:30:12 7/21/2005 (0)
Re: bc-02 blocked solid Me again 03:20:23 7/1/2005 (3)
- Re: bc-02 blocked solid Alchemist 21:09:03 7/1/2005 (2)
  - Re: bc-02 blocked solid MUGE 09:23:24 7/18/2005 (1)
    - Re: bc-02 blocked solid John 01:41:44 8/28/2005 (0)

Post Followup

Name:
E-Mail:
Subject:
> Species, > > Try removing the side cover and the the printhead. It can be flushed out by attaching a syringe to the inlet from the foam container. Then reseal and glue back the printhead/pcb contact assembly. Next reglue the cover plate. This works as a last resort and is less damaging then extended immersion in an ultrasonic bath. > > Alchemist > > > I have tried dipping the head in boiling water, and dipping > > the head in alcohol and even bleach. But it is still > > blocked solid. Yes, I tried forcing air through the vent as > > well. > > > > The only thing I can think of is to immerse the whole cart > > in boiling water and biol it for a few minutes to try and > > dissolve the blockage - whereever it is > > > > Any thoughts
Optional link URL:
Link title:
Optional image URL: